Skip to content Skip to sidebar Skip to footer
Home / SM-G570Y

[FIRMWARE] Samsung Galaxy J5 Prime SM-G570Y XID Indonesia - G570YDXU1AQG1

DroidDosh.com - Official Android 6.0.1 (Marshmallow) firmware for the Samsung Galaxy J5 Prime (SM-G570Y) with product code XID from Indonesia. This firmware has version number PDA G570YDXU1AQG1 and CSC G570YOLE1AQG1. The operating system of this firmware Galaxy J5 Prime (SM-G570Y) is Android 6.0.1 (Marshmallow), with build date August 16, 2017.

Samsung Galaxy J5 Prime (SM-G570Y)

DroidDosh.com makes no guarantees of any kind with regard to any files, programs, firmwares, drivers, or any other materials contained on or downloaded from this site. All such files, programs, firmwares, drivers and other materials are supplied "as is".

Important Notes
We recommend using Samsung Smart Switch and OTA (Over the air) or Samsung’s own utilities, to upgrade devices. Use ODIN Tool only if you are 100% sure about the risks involved in flashing your device. DroidDosh.com not responsible for any damage caused by using the files on this website.

See also:


Samsung Galaxy J5 Prime (SM-G570Y) Firmware


Model name: Samsung Galaxy J5 Prime (SM-G570Y)
Country/Region: Indonesia
Version: Android 6.0.1 (Marshmallow)
Product code: XID
PDA: G570YDXU1AQG1
CSC: G570YOLE1AQG1
File size: 1.63 GB

How to Flash Samsung Galaxy J5 Prime (SM-G570Y) XID Indonesia


  1. Extract (unzip) the Samsung Galaxy J5 Prime (SM-G570Y) Marshmallow firmware
  2. Download and install Samsung USB driver
  3. Download Odin v3.12.7
  4. Extract Odin ZIP file
  5. Open Odin v3.12.7
    Note: Samsung Kies is not compatible with Odin Samsung. You have to make sure that Kies is not running in your system tray. It is recommended to uninstall Kies before using ODIN.
  6. Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  7. Connect phone and wait until you get a blue sign in Odin
  8. Add the firmware file to AP / PDA

    How to Flash Samsung Galaxy J5 Prime (SM-G570Y) XID Indonesia
  9. Make sure re-partition is NOT ticked
  10. Click the start button, sit back and wait few minutes