Skip to content Skip to sidebar Skip to footer

[FIRMWARE] Samsung Galaxy J1 ace (SM-J110G) XME Malaysia - J110GDXU0APB1

Download the stock firmware for Samsung Galaxy J1 ace SM-J110G with product code XME from Malaysia. This firmware has version number PDA J110GDXU0APB1 and CSC J110GOLB0APB1. The operating system of this firmware is Android 4.4.4 (KitKat), with build date Monday, 22 February 2016. Security patch date is 2016-02-01, with changelist 986328.

Samsung Galaxy J1 ace SM-J110G

You can now download the stock firmware for the Galaxy J1 SM-J110G for free. Before downloading, make sure your device has the exact model code SM-J110G.

Disclaimer

DroidDosh.com makes no guarantees of any kind with regard to any programs, files, drivers or any other materials contained on or downloaded from this site. All such programs, files, drivers and other materials are supplied "as is".

DroidDosh.com disclaims all warranties, expressed or implied, including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement.

DroidDosh.com shall not be held liable for errors contained herein, or lost profits, lost opportunities consequential or incidentals damages incurred as a result of acting on information, or the operations of any software, included in this software site.

Download the Firmware Galaxy J1 ace (SM-J110G) XME Malaysia

ModelSM-J110G
Model nameGalaxy J1 ace
CountryMalaysia (XME)
VersionAndroid 4.4.4
Changelist986328
Build dateMonday, 22 February 2016
Security Patch Level2016-02-01
Product codeXME
PDAJ110GDXU0APB1
CSCJ110GOLB0APB1
File size539.40 MB

Important Note


We recommend using Samsung’s own utilities, Samsung Smart Switch and OTA (Over-the-air), to upgrade devices. Use Odin Tool only if you are 100% sure about the risks involved in flashing your device. We are not responsible for any damage caused by using the files on this website.

Take a backup of your personal data before flashing or installing the firmware on your Galaxy J1 ace (SM-J110G). As this helps you to recover the personal data whenever any thing wrong happens.

How to Flash Firmware on Galaxy J1 ace (SM-J110G) XME Malaysia


  1. Extract/unzip the stock nougat firmware that you have downloaded
  2. Download and install latest version of Samsung USB driver from DriverDosh
  3. Download Odin v3.12.7 from DriverSpace

    Note: Samsung Kies is not compatible with Odin Samsung. You have to make sure that Kies is not running in your system tray. It is recommended to uninstall Kies before using ODIN.

  4. Extract the Odin ZIP file
  5. Open the Odin folder, right-click the .exe file then choose Run as administrator to launch it

  6. Flashing the firmware with Odin Tool

  7. Boot phone into Download Mode. To do so, power off your device and then press and hold the Volume Down + Home + Power buttons at the same time. Keep the keys pressed until you see the warning screen and then press the Volume Up key to enter the Download/Odin Mode.
  8. Connect phone and wait until you get a blue sign in Odin
  9. Add the firmware file to AP / PDA

    Flashing the stock firmware on Samsung Smartphone with Odin Tool
  10. Make sure re-partition is NOT ticked
  11. Click the Start button on Odin to start flashing the firmware on your device. Wait till installation is finished, after which your device will reboot automatically. You will get PASS message upon successful installation from Odin.